Gelcoat & Resin HVLP Spray Gun 2.5mm Nozzle Gelcoater G-Two-Five (G2.5) ESG860

Description

The Gelcoater G-Two-Five (G2.5)
HVLP Gelcoat and Resin Spray Gun
With 2.5mm Nozzle
The G-Two-Five gelcoat spray gun is a full size professional grade HVLP gravity feed spray gun for spraying gelcoat, resin, or any high viscosity material.  The 2.5mm stainless nozzle is perfect for spraying gelcoat, resin or any high viscosity material too thick for conventional spray guns.  With an adjustable fan size up to 8 inches wide this gun is perfect for spraying large surfaces like molds, boats and hulls large and small and any composite refinishing job.  The 3-way adjustable controls feature a side mounted pattern adjust knob, rear mounted fluid adjust knob and bottom mounted air adjust control.
The G-Two-Five HVLP gelcoat spray gun comes standard with an owners manual featuring operation and care instructions for everyone from beginner to professional users, a tool kit with a wrench, hex wrench, 2 material filters, cleaning brush and a 600mL material cup.  The G-Two-Five is constructed with higher quality materials than similar looking HVLP guns and is designed to withstand acetone and other solvents used in the composites industry.
The G-Two-Five offers versatility with smaller size nozzle kits available in 1.4mm, 1.7mm, 2.0mm and 2.2mm making it suitable for almost any HVLP application!
For optional nozzle sets
CLICK HERE
.
Features:
Full size, professional grade HVLP spray gun able to spray large volumes and large surfaces.
Large 2.5mm nozzle for spraying gelcoat, resin or any high viscosity material.
3-way-adjustable controls featuring fan adjust, material/fluid adjust, air adjust.
Detailed users manual with illustrated instructions for all levels of user.
Constructed of higher quality materials than other similar looking HVLP spray guns.
HVLP technology uses less air and greatly reduces overspray resulting in massive energy, cleanup and material savings.
Compatible with acetone and other solvents common in the composites industry.
Optional nozzle kits available in 1.4mm, 1.7mm, 2.0mm and 2.2mm means you can use G-Two-Five for almost any HVLP application!
Specifications:
Standard nozzle size:                    2.5mm
Feed Type:                                     Gravity
Recommended air pressure:       0.2~0.4MPa/2~4bar/29~58PSI
Air inlet connection:                       1/4 inch NPT
Total assembled gun weight:       1lb 8oz (676g)
(including cup)
Total assembled gun weight:       1lb 4oz (570g)
(without cup)
Total assembled gun size:           H 13 1/2" x W 5 3/4" (34cm x 14.5cm)
(including cup)
Total assembled gun size:           H 7 3/4"x W 5 3/4" (19cm x 14.5cm)
(without cup)
Included cup volume:
600mL
Total package weight:
2lb 5.6oz (1067g)
Total package size:
9" x 6.5" x 5.5" (23cm x 16.5cm x 14cm)
Package Contents
G-Two-Five HVLP gravity feed gelcoat spray gun with 2.5mm nozzle.
600mL plastic material cup.
Tool kit with wrench, hex wrench, 2 plastic material filters (1 pre-installed in gun) and cleaning brush.
Detailed and illustrated user manual.
Please check out my other Gelcoat / Resin Spray guns and other items at:
MY OTHER ITEMS
Return Policy:
Buyer may return product to me within fourteen days from date of receipt.  However, this return right
only applies if:
(i) the product
has
not been used or tampered with
and is otherwise suitable for re-sale, and (ii) Buyer obtained prior
written authorization from me
to make a return.
(a) Restocking Charge.  If the product is returned within the return
period, then I
will give
the buyer a credit equal to 75% of the purchase
price
(i.e. there will be a
25% re-stocking charge).
However, this restocking charge only applies to the particular line item returned and not to the entire invoice.
(b)  Miscellaneous:
I
will not issue any credit to buyer after the fourteen day period.
Buyer must pay all taxes and other charges related to returned items.
Any goods returned by the buyer shall be returned at the buyer’s sole expense and obligation.