40000W/10000W LF Split Phase Pure Sine Wave 48VDC/110V,220VAC 60Hz PowerInverter

Description

10000W(Max 40000W) Low Frequency Split Phase Pure Sine Wave Power Inverter
DC Input 48V        AC Output 110V,220V 60Hz
With 150A High Speed Battery Smart Charger
With 3.5" LCD Meter
With UPS Funtion
For this Split Phase model
For AC 110V:approx 80% power means 6500W-8000W 110V output
For AC 220V:approx 20% power means 1600W-2000W 220V output
For AC 220V and AC 110V at the same time:Not more than 8000W
The Battery Charger Function only for 110v home grid power,cannot for 220v
Hi All
What you talking about???  You kidding me, 10,000w LF inverter?  Sure such big monster?
Hey, A man for his whole life is real deserve to have this kind of monster, oh, yes, power jack just offer you what you real want in your mind, put this guy into your house, no body will doubt you, they just feel excited & amazing, want to touch
this big guy, only to USA 48 states, what you waiting for?  Enjoyed it!!!
A lot of people want Split phase power inverter, however, they can not find this kind of inverter on the marketing, now power jack hear your voice, we prepare lots stock for usa customer demand, our ac output as follows:
2 ac output socket, output is 110v, also we have hard wire terminal
Also about the battery charger must be use 110v to charge the battery, as this new idea for production line.
1. this is easy to replace the power mos board only some screws.
2. this design plus big copper, original design is using cable, however not good enough, using copper can bring the high efficiency & low down the teamp, not easy go to teamp protection, especial you are using 300-400amp pass through.
3.
For UPS Function: usually UPS function is build-in battery, only can run about 5 mins. However, this inverter can decide how long you want to use, the higher capacity battery you connect, the longer time you can use. Just connect the AC power cord to your home AC source, when out of AC power, the inverter will auto switch to inverter function, this can be your back power.
Seller's Command:
1.Note: this item is 48V DC Input, usually when you use big power,the best Input voltage is 48V,because the amp will become small, will not cause the inverter getting so hot, if inverter not hot, the efficiency will arrive 2-3%,means can go to 92-94%, also your battery bank can keep very good performance! watt=volt x amp, once your voltage getting high, your amp will become small.
2.this inverter will come unversal plug with big amp socket, all the coutnry can be used!.
3.this inverter is LF inverter, we called low frequency, with big transformer inside(around 12kgs),this design just for the heavy duty appliance, like pump, motor, freezer, grinder, microwave, heater.
I sold the inverter about 10more years, most of is HF INVERTER(made by mosfet), even it's 5000w inverter,
still get some feedback from customers side, they say why i use pump, grinder can not turn it on? or use some weeks, the inverter dead, because some heavy appliance maybe just 500w, however, when turn it on need 10-15times conitnue power(5kw-7.5kw) to start it, in this moment, very easy to damage the mos-fet, it happened all the time, i am very upset about this situations & no idea to real solve the problem.
One day my friend who is engineer to charge the power source about the airplane & train, he told me can think about the LF INVERTER, as all the airplane, train, big board, RV CAR, they are set up this inverter with no problem.I go to find how this inside made, the major point is big transformer, made by a wide copper, very strong enough 100times than HF INVERTER(made by mosfet) to produce smooth power & of course, even 5-8years after, the transfomer still working good!
4. you may see a lot of inverter in the marketing for sell, price will be hurge different, 80% is HF INVERTER, because its' handy 3kw around 5-6kgs, 5kw around 10kgs, but before you make a choice, just asking can this run microwave, compressor, pump?  You may not get very satisifed answer, that's the big difference!
What i recommend is just spend your money for power source at 1 shot can real useful, real match your power source demand.
5. this also including big battery charger, also you can do it like UPS, inverter, charger, almost offer your all power source demand.
6.TURBO POWER AUTO DETECTION:
when you use some motor, engine, pump, some need 10 times surge power require, in this moment, the IC will auto offer more amp come from the battery with 2 times standby power to turn on the heavy appliance, after turn it on, the amp will come to normal voltage & amp.
7.  Inside big transformer is made by Taiwan factory, material come from Japan, that's bring the inverter efficiency come maintain to 92% at least.
8.  Inside mosfet from Germany, not made in China, that's making sure the inverter for long time use, will be no problem, temperature can stay around 60
℃
.
9.  UPS function:
a.  usual UPS function is build-in battery, only can run about 5 mins.
b.  however, this inverter can decide how long you want to use, the more high capacity battery you connect, then you can use whatever you want
c.   Just connect the AC power cord to your home AC source, when out of AC power, the inverter will auto switch to inverter function, this can be your back power.
10. LCD meter function: 3.5" LCD display, watt, voltage, amp, very clear to understand your appliance situations.
1). AC Output watt :0 Watt (Max display power 15KW
,
can display running power less than 1W )
2). AC Output Volt : 0 volt (Max display volt 270V)
3). AC Output Amp : 0 Amp  (Max display amp 55A)
4).  Total Operation time :0-60000 hours
（
Operation time: 0
～
59 minutes to 24 hours to 2500 days
）
5).  Electricity consumption: 0
～
1000000 kwh
6).  Electricity cost: 0
～
10000000 $
7).  Total operation time , electricity consumption and electricity cost can clear
8).  Can set up power ,the meter will alarm when reach reserve power
9).  Can set up the cost
10).   Refresh rate: one time 0.5 seconds
11).   Messurement Accuracy: ±1%
N
ewest
Version Function
1. Voice Selection (Chinese, English)
Hold down the button for 2 seconds, the machine prompts language has been switched, release the button, after 2 seconds, if hear 2 beeping sounds, then the language selection was successful.
2. Hz Selection (50Hz, 60Hz, automatic selection)
Hold down the button for 2 seconds, the machine prompts Hz has been switched, release the button,  after 2 seconds, if hear 2 beeping sounds, then the frequency selection was successful.
3. DC alarm voltage adjustment (±0.5V)
Adjust counterclockwise to reduce DC alarm voltage
Adjust clockwise to raise DC alarm voltage
4. AC output voltage adjustment (210V-240V or 105V-135V)
Adjust counterclockwise to decrease AC output voltage
Turn clockwise to raise the AC output voltage
5.
Fan turn on & off botton by manual:
Turn on & off the fan by manual anytime
6.
ATS:
If the machine is connected to the battery and home mains at the same time, the machine will use Inverter function first. When the battery voltage is lower than 10.5V(for 12V inverter) or 21.5V(for 24V inverter), the machine will automatically switch to charging mode. In charging mode, the AC output will be from home mains. When the battery voltage rises to 14V(for 12V inverter) or 28V(for 24V inverter), the machine will automatically convert back to Inverter function, when switching the function will not affect the use of appliances.
7.
UPS：
If the machine is connected to the battery and home mains at the same time, the machine priority to use the home mains electricity, if the home mains electricity is failure, the machine will be automatically converted into Inverter function to run the home appliances.
POWER SAVE ON :
If you only connect battery with load, ac cable unconnect, when you switch to battery charger mode, this means is power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode , no load current is 0 AMP, every 3secs, the inverter will detection itself, after the 3sec, amp will go to 3amp(stand by power, time: 1sec, then back to sleep mode, amp is 0),  the inverter will repeat the situation, until you switch to power save off(inverter on, down side)
some customer need use refrigerator ，can switch to power save on mode, as refrigerator only will work every  half an hour or one hour  ,  but inverter stay in power save function, no load current is 0amp , can save power.
What's the different between High Frequency and Low Frequency?
HF power inverter have limit for runing appliances with motors ,engines,special light and TV
LF power inverter available for sensitive load,accept generator’s energy output,high power factor
Feature:
Ideally suitable for Journeys, Camping, Tents, Boat Trip, Working on the way and everywhere, where is no electricity !
Simply connect our with Battery.
For example as in a Car, Motorcycle, Camper or Boat and use electrical appliances.
Possible Uses:
Equipment:
Computer, Latop, Monitors, Fax Devices, Scanner
Entertainment Electronics:
TV, DVD-Player, Play Consoles, Hi-Fi-Systems, Music Instruments, Satellite Decoder
Household Appliances:
100w Fans, Electric Shaver, etc...
Kitchen Devices:
Toaster etc...
Electrical Tools:
Drill, etc...
Because some appliances have instant power or motor, when use our power inverter must pay a attention for some points as follow
1. It is better to use pure sine wave power inverter to connect with the TV, not modified power inverter.
2. It is better not use our power inverter connect with the fluorescent (lamp). There are two kinds of fluorescent, one is inductance type: when turnon switch, the light can on after one second or more and some also with buzz, this light has instant high voltage and it is more than 700v and even more than 1000v;another one is electronic type, it also has instant current and can be more than 700 Ah.
It only can use our power inverter to run the bulk.
3. if want to run the machine like washing machine ,refrigerator or water pump, coffee grinder or kettle which have a motor ,then need to use more than 15 times to 20. times power of them, because they all have instantaneous power when turn on.
Specification
Brand
Power Jack
Item no.
LFPSW-10000-48-110/220
Continuous Output Power
10000W
Max Output Power
40000W
DC Input Voltage
48V
AC Output Voltage
110V/220V
Regulation
±5%
Frequency
60HZ±3%
Efficiency
90%
Output Wave Form
Pure Sine Wave
Temperature Protection
70C
Input Low Voltage Alarm
42V
Input Low Voltage shutdown
40V
Input High Voltage Alarm
59V
Input High Voltage shutdown
>60V
Dimension
38cm x 26cm x 15cm
Warranty
1 year
Net Weight
35Kgs
Certificate
CE
Components
Made in Taiwan
Design
Taiwan
International
Shipping
We just accept paypal and T/T bank at this time!
Fast, Reliably and Directly!!!
Free Postage to USA(only for 48 states & non-remote area) and Canada customers
excluding Alaska/Hawaii/Puerto Rico/APO/FPO/US Protectorates/Po Box
For remote area,need add extra postage charge ,other place pls confrim the postage first,thanks
International Buyers – Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.